Thanks all for the suggestions. Switchjing to manual seems to be the
easiest option (although I liked the SO2R suggestion) and CTRL-UP/DN then
works perfectly to switch between bands.
73 ES GL in the contest,
Barry K6RM
On Sat, Sep 13, 2014 at 11:49 AM, Kyle Chavis <wa4pgm@embarqmail.com> wrote:
> Turn the rig control off is the only way it's going to work. Then you can
> type in the frequency of your choice but be sure to do it each time you
> change bands.
> 73 Kyle
>
> On 9/13/2014 11:25 AM, Barry Pfeil wrote:
>
>> I'd like to use my N1MM logger for today's ARRL VHF contest. Problem is
>> that I have it interfaced only to my Elecraft K3 for 6 meters but I use
>> other rigs for 2M and 70cm. Is there a way to override the band data from
>> the keyboard on a QSO-by-QSO basis in N1MM? When I tell N1MM to switch up
>> a band (CTRL-Up) it momentarily shows 144 then switches immediately back
>> to
>> 50 because the radio (K3) can't change.
>>
>> Failing to find a way to override the frequency info, I guess I could just
>> shut down the radio interface. Maybe I just answered my own question....
>>
>> Any suggestions?
>>
>> Thanks and 73,
>> Barry K6RM FM03
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting@contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>>
>>
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|