VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] Upgrade for your Rover?

To: "John D'Ausilio" <jdausilio@gmail.com>
Subject: Re: [VHFcontesting] Upgrade for your Rover?
From: kb7dqh@donobi.net
Date: Sat, 27 Jun 2009 00:37:21 -0700 (PDT)
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
Looks familiar... Crank fits into the gearbox at the top of the section
below the one you "wind up" and move the crank to the next lower, step and
repeat...  Wonder what a machine shop would charge for cutting the rack
and matching gear???  Could be "hambrewed" easily with square aluminum
tube,
UHMW plastic spacers, and use wire rope and pulleys to "squirt it out"...
Someone did this in California, had it set up at MUD 2005 but broke a pulley
that was not up to the task. Otherwise made a great platform for the
microwave gear...
Eric
KB7DQH

> I have one of these on the back of the Jitney .. it's an awesome rover
> mast, makes for very quick setup/takedown and it's made of a very
> high-strength but light aluminum alloy. I got mine for $50 direct from
> the gov at Dugway Proving Grounds surplus outlet in UT back in the
> 80's. My understanding is they were originally used for a portable
> lighting system, the original configuration has 4 legs that swing down
> and are braced with diagonal poles up to the top. Used it for years
> for FD, etc .. but once I started playing V/U/uW it was obvious it
> would make a great rover mast.
>
> see http://www.flickr.com/photos/62588861@N00/3586812727/
>
> de w1rt/john
>
> On Thu, Jun 25, 2009 at 6:02 AM, Dan Evans<dan.evans@insightbb.com> wrote:
>> Here is a nice mast:
>>
>>
>>      Tubular Crank Up Tower Nice
>>
>>
>> http://www.eham.net/classifieds/detail/292468
>>
>>
>>
>> Wish I could afford it!
>>
>> 73
>> Dan
>> --
>> Amateur Radio Emergency Service, Clark County Indiana. EM78el
>> K9ZF /R no budget Rover ***QRP-l #1269 Check out the Rover Resource Page
>> at:
>> <http://www.qsl.net/n9rla> List Administrator for:
>> InHam+grid-loc+ham-books
>> Ask me how to join the Indiana Ham Mailing list!
>>
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting@contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>


_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>