VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] DC injector for ICOM preamp?

To: "Tim Coad" <timcoad@gmail.com>, <VHFcontesting@contesting.com>
Subject: Re: [VHFcontesting] DC injector for ICOM preamp?
From: "Rogers, Ron" <RR124640@ncr.com>
Date: Sat, 5 Jan 2008 22:30:18 -0500
List-post: <mailto:vhfcontesting@contesting.com>
Advanced Receiver Research (ARR preamps) used to sell them.........
 
Try here >
 
http://www.advancedreceiver.com/page26.html
 
Ron
WW8RR
 
________________________________

From: vhfcontesting-bounces@contesting.com on behalf of Tim Coad
Sent: Sat 1/5/2008 4:41 PM
To: VHFcontesting@contesting.com
Subject: [VHFcontesting] DC injector for ICOM preamp?


I have a 432MHz ICOM mast mount preamp I used to use with my IC471.  Though
my new IC7000 hears tons better than the IC471 alone, it does not hear as
well as the 471 + preamp.

The Icom preamp DC is supplied via the coax from the 471, the IC7000 does
not, (at least I cant find it), have this feature.
Does some one make DC injectors to put 12V onto the feed line?
Recommendations?
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting


_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>