You guys have out done yourselves. Between the posted replies and several
private e-mails, I have a much better idea of how to go into this contest as a
first time "Limited Rover". What I am noticing is that there is not one single
answer for everybody. Each person is doing things different and it seems like
its based on station capabilities, operating style, populations, location and
activity levels. I've found advice in each reply that I can use in my
operating situation. I will be taking a little bit from each of you.
Just to let you know what I'm working with, I'll give a basic description of
what I have and what the plans are. I have an Icom IC7000 mounted in the
console box of my truck that I have been using for a few months. I'm pretty
comfortable using it on the move and have become fairly adept at using the
functions with a minimum of distraction (I even worked a few split DX stations
while driving 70 MPH down I-95). I also have an IC 746 Pro that is going into
the back seat. I have an aux battery in the tool box of the truck with a power
panel in the cab to run everything.
For antennas, I have two painter's poles that are reinforced with PVC pipe and
bolted to a cargo divider across the bed. On the first pole, I have stacked
loops for 2 meters and 432. On the second pole, I have a single loop. These
are the antennas for use while moving. When I reach a place to set up, I have
an Elk log periodic for 2/432 on a quick detach mount that goes on the 6 meter
loop pole. I also have a Stressed Moxon that goes on the other pole and
attaches with only two thumb screws. The painter's poles will raise each
antenna roughly 19' above the ground. Total set up time from park to operating
is less than 5 minutes.
Both directional antennas will be aimed toward the front of the truck. The
truck has a factory navigation system with a built in compass. I'll rotate the
truck as needed to aim the antennas. The factory nav also has a function to
show exact longitude and latitude. With that and a small paper map, I'll know
exactly when I cross into a new grid.
The plan is to start on a mountain and operate for about 3 hours. I'll then
move to the beach which is at a grid corner and includes two fairly rare grids
(FM26 and 27). I'll be taking a slightly circuitous route which will put me in
two other grids for only a few miles. I will not be stopping in those but will
make contacts while moving to "open" them for the multiplier.
Earlier this month, I made a scouting trip to the beach and found several
suitable places to operate. While there, I made a number of VHF contacts with
both directional and omni antennas. The Elk antenna gives a big advantage to
the 432 stack, but the 2 meter stack proved to be as effective as the Elk on
that band.
At about sunset on Sunday, I'll head North. I found a nice rest stop about a
mile into FM29 on my way home where I could set up if I have the time, energy
and there is enough activity to warrant it. From there, I head home where I'll
finish up close to the house.
Based on everybody's input, I'll be refining this and figuring out how loose or
tight to make my schedule and how and when to run and when to S&P. I'll likely
have a co-pilot to help me log as well. I'm still working out details, but
this list has been invaluable so far.
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|