Hi Terry,
It's been awhile, but it seems like on one of the acc. connectors there
is a key line for HF and another pin for VHF. And the other connector
is used for the interface. What I did was wire a jumper on the
un-used acc. plug so the HF and VHF lines are combined. With the 746
you can only use one band at a time, so it has never caused me any problems.
Hope this makes sense. If you are still having trouble, let me know and
I will pull out the manual and give you a better description.
73
Dan
--
K9ZF /R no budget Rover ***QRP-l #1269
Check out the Rover Resource Page at: <http://www.qsl.net/n9rla>
List Administrator for: InHam+grid-loc+ham-books
Ask me how to join the Indiana Ham Mailing list!
CatWhiskR@aol.com wrote:
> Guys,
>
> Does anyone have an easy fix for keying the IC-746 with the Signalink USB. I
> have been using it just fine on 6 meters using accy jack #1, but just started
> working on 2 meters, and it won't key because the radio uses accy jack #2 for
> 2 meters. Has anyone run into this and do you have the fix for it? I suppose
> I
> would need to build another interface box to feed both accy jacks. A shame to
> have to kludge up another unit.
>
> Terry/N6CW
>
>
> **************************************
> See what's free at
> http://www.aol.com.
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|