VHFcontesting
[Top] [All Lists]

[TowerTalk] Transco power connector

To: "'John D'Ausilio'" <jdausilio@gmail.com>,<VHFcontesting@contesting.com>, <towertalk@contesting.com>
Subject: [TowerTalk] Transco power connector
From: "Robert Carroll" <w2wg@comcast.net>
Date: Fri, 8 Jun 2007 15:16:09 -0400
List-post: <mailto:towertalk@contesting.com>
On a Transco note, I need some circular 6 pin male power connectors to mate
with the 6 pin female Bendix 8326 connectors on several Transco transfer
relays I need to use.  I have been looking at hamfests and in catalogs but
have not found any.  Can someone point me toward a source?

Thanks.
73
Bob W2WG

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of John D'Ausilio
Sent: Tuesday, September 12, 2006 9:22 AM
To: VHFcontesting@contesting.com; towertalk@contesting.com
Subject: [TowerTalk] Transco 1P4T relay repair

Anyone ever taken one of these things apart? I've got a pair of them
I'm using on the jitney to switch 903-1296-2304-3456 onto a single run
of LMR600UF up the pole. During pre-installation testing, I noticed an
intermittent increase in loss (pushing 0dbm of 2304 through it). I see
that the 4 N-connectors are removable, and I assume that the other end
of the center pins are actually the relay contacts, but I thought I'd
look for some wisdom before getting out the wrenches ..
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.12.3/445 - Release Date: 9/11/2006


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Transco power connector, Robert Carroll <=