VHFcontesting
[Top] [All Lists]

[VHFcontesting] FM Contesting . . .

To: <vhfcontesting@contesting.com>
Subject: [VHFcontesting] FM Contesting . . .
From: "S.J.Swanson" <swanson@ticon.net>
Date: Sun, 20 Feb 2005 07:15:32 -0600
List-post: <mailto:vhfcontesting@contesting.com>
Good Morning:

The Milwaukee Radio Amateurs' Club has sponsored a February FM Simplex Contest 
the last three years. The goal was to introduce contesting to new amateurs and 
show the capability of simplex operating when the repeaters are down. We are 
fortunate in that four grids come together at a major intersection in the 
Milwaukee Metro area so the concept of multipliers is easy to handle. The rules 
are available from me as a Word or PDF document. 

It covers the lower four VHF/UHF bands in sprint format, with 45 minutes 
devoted to 2 meters and 30 minutes to the other three bands. Here's what we say 
about frequencies: 
 
"A.   2 meters 1:45 pm to 2:30 pm
(Primary 146.550, 146.565, 146.580 and 146.595 MHz)
(Secondary 147.540 147.555 147.570 and 147.585 MHz)
 
"B.   70 centimeters 2:30 pm to 3:00 pm
(446.025, 446.050, 446.075 and 446.100 MHz)
 
"C.   6 meters 3:00 pm to 3:30 pm
(52.530, 52.550, 52.570 and 52.590 MHz)
 
"D.   1.25 meters 3:30 pm to 4:00 pm
(223.520, 223.540, 223.560 and 223.580 MHz)" 

The rules go on to say : 

"1.    Frequencies essentially follow the ARRL VHF Contest rules and Wisconsin 
Association of Repeaters’ band plans.
 
"A.   On 2 meters no contacts on the 146.52 calling frequency, or the guard 
channels 15 KHz above and below ’52.  (Using the Wisconsin Band Plan’s 30 KHz 
spacing and 15 KHz splits).  Any entry from a station heard making QSO’s on 
these frequencies will be disqualified.  Try to limit activity to the primary 
frequencies. 
 
"B.   As a matter of courtesy and good amateur practice, avoid the other 
calling frequencies of 52.525, 223.500 and 446.000 MHz. 
 
"C.   Solicitation for simplex contacts on repeaters, but not 146.52, is 
permitted." 

The prohibition for contacts on 146.52 leaves a channel available for mobiles 
that may not be familiar with local repeaters and PL's for emergency 
communications. There is also a caveat to specify a frequency to QSY to from a 
repeater. The limited time on each band has succeeded in avoiding irritating 
the folks that do hang out on simplex -- at least no complaints have been 
heard. 

What have we accomplished? 

1. I do not feel that we have increased local simplex activity or FM activity 
in other contests. I have a local E-letter and announce that during a contest, 
I will be periodically calling CQ on a 2 meter FM simplex frequency on the hour 
-- no results! 

2. The folks that score big are already contesters. 

3. We have a perpetual plaque at Amateur Electronics' Supply here in Milwaukee 
that honors the Club with the highest score. The hope was that local repeater 
clubs would organize for the event. The first two years the sponsoring club, a 
general amateur radio club, won. This year The Badger Contesters, a regional 
VHF/UHF weak signal group has made an effort and will probably get their name 
engraved on the award. (There are also certificates for individuals with high 
over all and high in each band.) 

4. We have increased the number of folks that operate 223 MHz, many getting an 
HT or low end 223 MHz mobile rig just for the contest. I had 6 Q's on the band 
last year, this year I had 16. Will it translate to more 1.25 meter activity? I 
doubt it. Hams on FM seem to want instant gratification and the concept of 
calling "CQ" time after time is totally foreign. 

5. Everyone that participates really enjoys the 'test and can't wait for next 
year! However the Contest seems to have a life of its own but has not meet the 
initial goals! 

Again, feel free to contact me directly for more information or the rules/flyer 
we use. 

73, Sherm KB9Q, (EN52vv)

swanson-KB9Q@ticon.net


_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>