Todd
I am using the M2 Loops for both 6 and 2. I started out with them on a
standard mast pipe mounted to the chimney. 2 loops for 2 and 2 for 6. I
moved the antennas from the mast pipe to the tower and the only difference I
saw was the improved signals from the much better and higher location. It
appeared that the tower had very little affect.
Ray
N2MCY
-----Original Message-----
1. Mounting omni loops to tower legs (Todd and Sandy Sprinkmann)
----------------------------------------------------------------------
Message: 1
On Friday, I'm going to be mounting the Par OmniLoops I have on the =
side of my house to a better location on the side of a 100' tower. They =
are a 2-stack of 6m loops and a 2-stack of 2m loops.
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|