The one I had the relector was 117 inches; the driven was 110 inches, and
the 3 directors were 105;104; and 103 inches respectively. The spacings
between all elements were 35 1/2 inches.
Joe W4AAB
----- Original Message -----
From: David M. Benton <wb4jgg@bellsouth.net>
To: <vhfcontesting@contesting.com>
Sent: Thursday, June 26, 2003 6:02 AM
Subject: [VHFcontesting] Cusch Craft 6 meter beam
Hi all,
I recently purchased a used 5 element CC 6 meter beam at a hamfest. I did
not get an owners manuel. I'm trying to help my local club with field day
and wanted to put up a 6 meter station. Can anyone e-mail me a copy of the
schematics of this beam? Element length, element spacing, driven element
measurements, ect. It would be greatly appreciated.
Thanks, David
WB4JGG em75
wb4jgg@arrl.net
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|