Hi Folks,
As a winter project, I'm considering building a medium power 2 meter amp. I
would be interested in comments on popular amp designs. Right now I am
giving serious consideration to the amp featured in the 1994 ARRL Handbook
based on the 8930 or 4cx250. But I would certainly be open to suggestions
for better designs.
My requirements are pretty simple. I have a very limited budget, but I
figure I can pick up the parts over the span of a few months OK. The amp
has to be LINEAR, as it will be used primarily for SSB/CW. My primary rig is
an Icom 746, so I have up to 100 watts of drive available if needed.
Although I do a lot of Roving, I'm planning this amp to be used for the home
station. I think a solid state amp of this caliber would likely be beyond
my budget...
Tips, suggestions, comments?
73
Dan
Dan Evans N9RLA
Scottsburg, IN 47170
{EM78}
IN-Ham list administrator
QRP-l #1269
1/2 of the N9RLA /R no budget Rover Team
Check out the Rover Resource Page at:
http://www.qsl.net/n9rla
|