VHFcontesting
[Top] [All Lists]

[VHFcontesting] Which contest voice keyer?

To: <vhfcontesting@contesting.com>
Subject: [VHFcontesting] Which contest voice keyer?
From: kharker@cs.utexas.edu (Kenneth E. Harker)
Date: Thu Jun 19 16:44:15 2003
On Wed, Jul 17, 2002 at 09:15:47AM -0500, Donald M. Ross wrote:
> I'm looking at cutting down on some of the clutter in my shack and looking
> at possibly replacing my MFJ DVK with one that fits inside the computer.
> Since I am basically clueless on which ones are out there and how they work,
> I thought I'd ask some of the "gurus".

There are three ways you can do this:

K1EA DVP card (requires one ISA slot)
W9XT Contest Card (requires one ISA slot)
SoundBlaster compatible sound card

If all you have is PCI slots, yor only real choice is a sound card.  TR Log
supports the DVP and the W9XT cards directly.  To use a sound card you need
to get SBDVP, a terminate-and-stay-resident (TSR) software package that
you load into memory before your start TR Log.

> I plan (at this time) to run TR Log and a Top Ten Devices DX Doubler.  The
> card will go in the docking station for my Gateway PII 300 running Win98SE
> and eventually into a stand-alone desktop to be used strictly for ham radio
> (probably a 1 GHz+ running Win2K Pro).
> 
> Thanks in advance.
> 
> Don Ross, NL7CO/EM04
> 
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting

-- 
----------------------------------------------------------------------------
Kenneth E. Harker      "Vox Clamantis in Deserto"      kharker@cs.utexas.edu
University of Texas at Austin                   Amateur Radio Callsign: WM5R
Department of the Computer Sciences      VP, Central Texas DX & Contest Club
Taylor Hall TAY 2.124                         Maintainer of Linux on Laptops
Austin, TX 78712-1188 USA            http://www.cs.utexas.edu/users/kharker/
----------------------------------------------------------------------------

<Prev in Thread] Current Thread [Next in Thread>