VHFcontesting
[Top] [All Lists]

[VHFcontesting] Delta match queries. . .

To: <vhfcontesting@contesting.com>
Subject: [VHFcontesting] Delta match queries. . .
From: crawfish@surfmore.net (Joe Crawford)
Date: Thu Jun 19 16:44:00 2003
I forgot to mention, the coax used in the balun IS RG-11/U (75 ohms). Just 
found info on delta match on M1CCZ's web site.
                                            Joe W4AAB
  ----- Original Message ----- 
  From: Joe Crawford 
  To: Donald Huntington ; Qrpvhf@aol.com 
  Cc: vhfcontesting@contesting.com 
  Sent: Monday, January 28, 2002 9:34 PM
  Subject: Re: [VHFcontesting] Delta match queries. . .


  I have a copy of a copy I can mail of the 64B. Basically, the T-match is 
using the driven element as a folded dipole with a half-wave coax balun(80 
inches long) to transform the impedance from 200 ohms down to 50 ohms. I like 
it very much.Beats gamma matches.I will research the delta match, but I like to 
use the delta match on 2m and above.
                                                      73,
                                                      Joe W4AAB
    ----- Original Message ----- 
    From: Donald Huntington 
    To: Qrpvhf@aol.com 
    Cc: vhfcontesting@contesting.com 
    Sent: Monday, January 28, 2002 3:09 PM
    Subject: Re: [VHFcontesting] Delta match queries. . .


    If my memory serves me, The T-match feed is very simple. It consists of a 
half wave balun of 75 ohm coax (RG59 or RG11) tied to the feed point. It works 
well and lasts a long time. As far as dimensions, maybe some one who has a 64B 
or 66B instruction sheet can mail you a copy. Good Luck, Don K1DH


    >From: Qrpvhf@aol.com 
    >To: vhfcontesting@contesting.com, vhf@w6yx.stanford.edu, 
SixScatterWeakSig@yahoogroups.com, rover@mailman.qth.net 
    >Subject: [VHFcontesting] Delta match queries. . . 
To: <vhfcontesting@contesting.com>
    >Date: Mon, 28 Jan 2002 16:59:45 EST 
    > 
    >Was looking at the plans for the old Hy-Gain 6element 6meter beam from the 
    >6mt.com web site. It uses a dipole/T-match type feed system, however it 
    >doesn't give any information about the matching system. 
    > 
    >Therefore I was looking at using a delta match instead as I have made one 
of 
    >them before and it worked OK, gamma matches have me lost in space. 
    > 
    >Anyone have any advice or suggestions? ? ? 
    > 
    >73's Jacob Tennant, K8JWT 
    >Morgantown,West Virginia 
    >_______________________________________________ 
    >VHFcontesting mailing list 
    >VHFcontesting@contesting.com 
    >http://lists.contesting.com/mailman/listinfo/vhfcontesting 


----------------------------------------------------------------------------
    Join the world's largest e-mail service with MSN Hotmail. Click Here
    _______________________________________________ VHFcontesting mailing list 
VHFcontesting@contesting.com 
http://lists.contesting.com/mailman/listinfo/vhfcontesting 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://dayton.akorn.net/pipermail/vhfcontesting/attachments/20020128/dad3d05e/attachment.htm
<Prev in Thread] Current Thread [Next in Thread>