Towertalk
[Top] [All Lists]

Re: [TowerTalk] Ferrite beads for LDF4-50?

To: "towertalk@contesting.com" <towertalk@contesting.com>, Mike Fatchett W0MU <w0mu@w0mu.com>
Subject: Re: [TowerTalk] Ferrite beads for LDF4-50?
From: Wes Stewart via TowerTalk <towertalk@contesting.com>
Reply-to: Wes Stewart <n7ws@yahoo.com>
Date: Sat, 23 Aug 2025 15:39:58 +0000 (UTC)
List-post: <mailto:towertalk@contesting.com>
 Well, I'll fix that.  Connector losses are usually overestimated.  If they are 
well mated, loss is difficult to even measure.  But what they introduce is 
unreliability.  Type N connectors are, in my experience, unreliable when 
outside with the temperature extremes here in the desert.

    On Saturday, August 23, 2025 at 07:45:48 AM MST, Mike Fatchett W0MU 
<w0mu@w0mu.com> wrote:  
 
 The silence is deafening.

On 8/23/2025 8:33 AM, Chuck Dietz wrote:
> I have been thinking about this myself and I wonder if the connector
> between the hardline and the rotor loop might have more loss than the
> difference between the hardline and LMR400 ultra flex cable. In other
> words, maybe just run LMR400 and not have a connector in line.
> I have not done the math, but I think it would depend upon the total length
> of the cable. Mine will go from the stackmatch to the bottom of the tower
> where it will connect to 7/8” hardline.
>
> Chuck W5PR
>
> On Sat, Aug 23, 2025 at 9:09 AM Jim Miller <jim@jtmiller.com> wrote:
>
>> 6m beam. i have a rotator loop. this is for the longish boom run.
>>
>> i've got it all figured out so now to implement.
>>
>> i had no idea that ferrite beads over 1/2" hardline would be so
>> controversial.
>>
>> jim ab3cv
>>
>> On Sat, Aug 23, 2025 at 8:58 AM Chuck Dietz <w5prchuck@gmail.com> wrote:
>>
>>> Jim, is this for a fixed antenna or a rotating tower? Or, is it for a
>>> rotator loop?
>>>
>>> Chuck W5PR
>>>
>>> On Fri, Aug 22, 2025 at 5:44 PM Jim Miller <jim@jtmiller.com> wrote:
>>>
>>>> I found some. In stock. No problem.
>>>>
>>>> Jim ab3cv
>>>>
>>>> On Thu, Aug 21, 2025 at 4:54 PM Jim Miller <jim@jtmiller.com> wrote:
>>>>
>>>>> I'm redoing my 6m feed along the boom with LDF4-50 and would like to
>>>> put a
>>>>> string of type 43 cores along it.
>>>>>
>>>>> Has anyone here done that and what did you find to use? I'd like to
>>>> avoid
>>>>> including a normal piece of coax if possible.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Jim ab3cv
>>>>>
>>>> _______________________________________________
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> TowerTalk mailing list
>>>> TowerTalk@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
  
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>