According to ARCO, the 400 watt version is for large prop pitch and
homebrew rotors. Everything else should be fine with the 200 watt version.
Mike - KI8R
On Mon, Dec 11, 2023 at 7:39 PM <al.n6ta@gmail.com> wrote:
> Santa may be visiting me this year and bringing an ARCO controller to work
> with my year old OR2800 (DC motor). I cannot find any specs o the drive
> current to the OR2800 motor or maximum power needed by the motor to turn my
> mast. The ARCO has a high power option for the power supply that I doubt I
> need but would appreciate any comments. I also doubt that having a lot of
> overhead power available would help turn a mast that has some kind of
> friction issue.
>
> My antenna is a DB36/80 that is 2 feet above the bearing on the top of the
> DX-70 Tash tower. The rotor is about 7 been down from the tower top and
> the
> mast is attached with a K7NV clamp and 'I think' the mast is resting on the
> bottom of the clamp, not being partially supported by the bearing.
>
> I am currently using a GH RT21 to control the rotor and it has worked well
> but I am currently experiencing a problem that is yet to be resolved. I
> will detail that in a separate posting. Though I doubt the controller is a
> root cause of my intermittent ability to turn the antenna, I would like a
> general shack upgrade 'because I deserve it'.
>
> So, if anyone thinks a high power option for my simple antenna is useful, I
> would like to know and why.
>
>
>
> Thanks es 73,
>
> Al N6TA
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
---------------------------------------------
*Michael Murphy - KI8R*
mike@ki8r.com
www.ki8r.com
*614-371-8265 *
---------------------------------------------
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|