Re: [TowerTalk] Prosistel 61D

[David Gilbert <ab7echo@gmail.com>]

Some of that really isn't true.  The earlier AC model of the rotator was 
called just PST61, while the later DC model (with better water 
protection) is called the PST61D.  Prosistel clearly describes the two 
rotators as being different, and points out that the controllers are not 
compatible with each other.
Dave  AB7E


On 12/26/2022 4:32 AM, gd0tep@manx.net wrote:
> The problem with Prosistel in Italy is that they have so many variants of
> the same model, BUT without identifying each as different.
>
> I have two PST61 rotators, the first was green and has a 48v AC motor, the
> other a 12v (I think) DC motor, two completely different animals, yet both
> PST 61.
>
> IU have contacted the company about internal information of the rotator
> itself, and although they were very nice, the stock answer was to send it to
> them for repair.
>
> It is the same for the controllers. Most of those have a transformer that
> must be on the edge of it's rated limits as I've had 5 out of the 6
> controller TX  here fail, the simple answer was to fit a 50% uprated TX
> unit.
>
> As to the rotator itself, mine relied upon the main body bolted to the
> 'foot' of the rotator by four 1/4inch machine screws, no interlocking
> castellations of any sort. So all that antenna torque relied on the 1/4inch
> screws.
>
> The answer for me was to weld the foot to the main body, I also filled the
> body with hypoid gear oil.  It's been fine ever since
>
> My other PST61 has been rebuilt and also filled with gear oil, the main
> problem with the early 61 was water ingress via the top bearing.
>
> http://gd0tep.com/pst61/PST61.htm
>
> 73
> Andy
> http://gd0tep.com
>    
>    
>
> -----Original Message-----
> From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of
> john@kk9a.com
> Sent: 26 December 2022 03:37
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Prosistel 61D
>
> Which prop pitch motors do not hold well in the wind?
>
> Did you ask ProSisTel for a manual or their distributor?
>
> John KK9A
>
>
>
>
>
> Tony n2tk wrote:
>
> Dave,I didn't say the antenna is rotating back and forth.It only goes CCW.
> It rotated 11 degrees CCW today. So far it is a very slow rotation only
> CCW.There was a series of PP that could self-rotate even with their gear
> reduction.
> Still looking for a manual that deals with the inside of the rotator.
> N2TK, Tony
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk