Hi Pete. Have you considered using a tiny amount of Loctite 222 (purple) low
strength on a small section of the threads?Bill W6RGS
-------- Original message --------From: Pete Smith N4ZR <pete.n4zr@gmail.com>
Date: 12/4/22 06:05 (GMT-08:00) To: TowerTalk <TowerTalk@contesting.com>
Subject: [TowerTalk] Reliability (or not) of SMA connectors I'm not sure if
this is the right place or not, but thought I'd ask because this is at least a
feedline question.I have a number of SMA connectors in areas of my station like
my RBN SDR and my N1MM Spectrum Display. It seems like every few weeks I start
running into problems, and have to go through and retighten them to get rid of
intermittent signal losses. Is there anything that can be done to secure them
better?-- 73, Pete N4ZRCheck out the new Reverse Beacon Networkweb server
at<https://reversebeacon.net>.For spots, please use your favorite"retail" DX
cluster.______________________________________________________________________________________________TowerTalk
mailing
listTowerTalk@contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|