Jim,
See the photo at
https://drive.google.com/file/d/1eu8pSe_UvdPCsdKR5-trK3GlmE-G1SfV/view?usp=s
haring
The 15M beam just above this guy ring had major SWR issues before this
insulator was installed, and this fixed it.
73 John N5CQ
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of James M.
Galm, W8WTS
Sent: Monday, October 10, 2022 10:11 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Phillystran to steel tower connection.
I understand from previous posts that there is value in connecting a
Phillystran guy cable to the steel tower with an insulator. This avoids
grounding the 3 ft long Phillystran big grip to the tower connection point,
which will distort the pattern of nearby yagis. What have people done to
connect the insulator to the tower? It would not be sensible to use two EHS
big grips back to back with a short piece of EHS between them (one EHS BG at
the insulator and the other at the tower), as that would defeat the purpose
of the insulator. Is there a connection means between the 502 insulator and
a thimble that is only a few inches long?
73,
Jim, W8WTS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|