On 10/3/22 1:21 AM, M Gerber wrote:
Has anyone used a Knaack jobsite storage box or similar at the base of
their tower to house equipment?
I am familiar with Hoffman enclosures, however I might want to place a
mini-PC/Raspberry Pi (for wireless antenna switching) or even a QRO remote
antenna tuner along with several stack matches in the box. I also would be
looking to bring 120VAC into the box.
It sure seems that with a set of Greenlee punches, one of these job boxes
would work out nicely.
The Knaack box I have would be quite large for that kind of application,
and it would be kind of a chore to be always reaching in from the top.
But something like that would work fine. I'd rather find something with
a door that opens so you can get at it horizontally. The standard top
opening box probably isn't rain tight if you mount it sideways. I'm
sure they're available, having encountered them "in the field" as it
were, but don't recall the mfr. It might also be more expensive than the
job box.
I see from the Knaack website they actually make cabinets - they're not
as inexpensive as the thing you put in the back of a pickup, and there
may not be cheap knockoffs available, either.
The search term is NEMA 3R - consider also things like ventilation (and
screens to keep bugs and critters out)
As to punching the holes, sure.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|