John, I built a 30/17 dual monoband using AutoEZ for the optimization.
The result has been excellent and AutoEZ makes the various
compromise/optimization considerations manageable. If you enjoy that
sort of work, using this project to gain competence with AUtoEZ will be
very rewarding.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 9/23/2022 7:47 AM, john@kk9a.com wrote:
I just completed a big antenna project on my 150 Rohn 65g tower. I
refurbished or replaced every antenna on the tower, I added a couple of
rotators and moved things around a little. I still have a low unused ring
rotor installed and I would like to eventually add a smaller (maybe 3el per
band) dual band 15m, 20m Yagi. I enjoying homebrewing antenna and have
plenty of aluminum. I could use some design suggestions for creating a beam
with separate feedlines, preferably OWA. I have EZNEC and autoEZ but I have
limited experience with the latter. I have been unable to find any 15m/20m
interlaced Yagi model examples to get started with. I appreciate any
assistance.
Thanks,
John KK9A
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|