I have put up four K0XG towers, One used 45, one used 55 and two used 65. The
55 was permitted by the Hawaiian building dept. I submitted through an
architect (required)and used the Rohn 55 base and anchor plans from the Rohn
site (110 MPH). Eventually it was approved. As far as I know there are no
drawings of the "table" the tower sits on. Just measure and draw. By the
way, all four of the base control boxes were different..not a function of the
different sized tower, but rather a function of K0XG being a "cottage
industry). No knock on K0XG, it's a fine product.
I would have used it at my new place in V31, except unloading the 550 pound
monster off the container down there would have been an issue.
K4XS/KH7XS/V31XX
> I have acquired a 190 ft 55G rotating tower with K0XG guy rings and ground
> base (it belonged to W8HO, SK). Does anyone know of a documentation
> archive
> for K0XG products? Information such as foundation plans, parts lists, etc.
> would be helpful.
>
>
>
> Thanks in advance and 73,
>
-**********************
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|