The KW Matchbox that I have is a simple device with a single inductor with
8 taps that all connect back to a 2 gang band switch. I can’t speak to any
mods made.
W0QE has a comprehensive video:
https://youtu.be/OvRI1m4bBjQ
Mickey N4MB
On Sun, Mar 13, 2022 at 1:27 PM Tom Hellem <tom.hellem@gmail.com> wrote:
> I have a Johnson KW Matchbox that doesn't seem to be working quite right.
> It's very hard to accomplish a perfect match at times even though the load
> is well within the claimed capability of the tuner. The RF input from the
> TX is injected into an approx. 5 turn coil which surrounds a smaller
> diameter coil of many more turns. Looking at the 5 turn coil I can see that
> some previous owner had tried tapping different points on it for injecting
> the RF.
> Question- how critical is the tap point on this coil for proper operation
> of the tuner?
> The 5 turn coil is grounded on one end and open on the other, and is
> currently tapped approx. 1-1/4 turns from the grounded end.
> Does anybody know where Johnson tapped this coil when they built the tuner?
>
> Any input gratefully accepted.
>
> Tom
> K0SN
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
“Ends and beginnings—there are no such things. There are only middles.”
Robert Frost
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|