If I recall the element to mast clamp is just a formed aluminum plate
riveted to the boom with u-bolts clamping the element. If that is correct
the only thing that could corrode is the u-bolt. Force 12 did not seem to
like using stainless steel u-bolts. If the u-bolt is the only issue it is
pretty easy to measure them (check the bracket hole spacing too) and
purchase stainless steel replacements at McMaster-Carr, etc.
John KK9A
Eric Rosenberg W3DQ wrote:
The element and boom to mast clamps on my 20 year old Force 12 C3-SS are
very rusty and need to be replaced.
Nowhere in the construction/instruction manual do I see where size size
is specified.
Does anyone have that information?
For that matter, if anyone has suggestions on what mods/fixes I should
make on this antenna, which hasn't been touched since I put it up a long
time ago, please pass them along.
Thanks & 73,
Eric W3DQ
Washington, DC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|