I obtained a used HDBX48 with the tiltover base consisting of tubing and
u-shaped pieces to attach to 1" threaded rod. However I'm missing the
u-shaped pieces. The Rohn drawing I have doesn't specify the thickness
of the u-shaped pieces. Does anyone have a drawing or actual base to
find the thickness of the material the u-shaped piece is made from?
Looking at the drawing I'm thinking the piece is the same thickness as
the square plate at the bottom of the threaded rod, which is 3/8". If so
I can weld up what I need from flat stock.
73,
-de John NI0K
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|