Towertalk
[Top] [All Lists]

Re: [TowerTalk] Climbing a crank-up tower when nested

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Climbing a crank-up tower when nested
From: Phil <pmills7@comcast.net>
Date: Sun, 27 Jun 2021 09:41:14 -0500
List-post: <mailto:towertalk@contesting.com>
I've done it but don't recommend it.  First, all
sections must be fully bottomed out....you don't want
something shifting and trapping a foot.  The main
issue is that all the braces are Z-braces.  There are
no horizontal braces to step or stand on.  This makes
climbing as well as staying to do some work difficult.

73, Phil  W5BVB



On 6/27/2021 9:34 AM, Ken Alker wrote:
Why would you never climb a crank-up when nested?  I'm considering putting up a tower, and your comment made me curious.

Thanks,
Ken

--On Saturday, June 26, 2021 9:59 AM -0700 Steve Jones <n6sj@earthlink.net> wrote:

Al,
I have a UST HDX-589.  It tilts from the base.  I installed my Orion 2800
and TiltPlate plus DB42 on a chrome moly mast with it tilted over, resting on a pile of railroad ties about 4 feet high.  No problem tilting all that
hardware back up to vertical.  I would never climb a crank-up tower when
nested vertical or otherwise.  Not familiar with the DX-70.  I have lots
of photos if you're interested.
 73,
Steve
N6SJ

-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of
al.n6ta@gmail.com
Sent: Friday, June 25, 2021 10:03 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Tilting over a DX-70: how far over will it go?

I am contemplating purchase of a new DX-70 or the HDX572.  The DX-70 tilts
horizontally being level at about 9' above ground.  Has anyone tilted it
further than horizontal to get the antenna (on a tilt plate) closer to the ground for convenience?  My site will be suboptimal for use of a ladder or
lift to get up that 9' for maintenance.

I realize the 572 tilts at the base, not 9' up.

Also, did you tilt up from ground on initial erection with a mast and
rotor installed or put those in once it was vertical and then tilted over?



Thanks for any tips!

Al

N6TA



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk




_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>