Re: [TowerTalk] Yaesu 2800DXA

[Jim Brown <jim@audiosystemsgroup.com>]

On 4/21/2021 7:43 PM, Keith Dutson wrote:
> Likely the current draw in colder weather is dropping voltage below rotor 
> requirement.  So, I would increase the wire to 2x14 and 6x18.
I would beef up only the motor conductors. The location conductors (the 
smaller gauge) are only sensing the position of a pot.
73, Jim K9YC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk