John,
I use 3/16" double braided polyester to support the four T-shaped parasitic
elements in my 160m K3LR array. The longest span is about 250 feet, plus 100
feet+ running to the ground so these can be lowered easily.
Most of the ropes were purchased about 22 years ago from the bargain bin at
BoatUS/West Marine. They had slight imperfections.
The antenna wires are no. 12 insulated stranded THHN. I've had a couple of
wire breaks over the years but none in the ropes.
73/Jon
Jon P. Zaimes, AA1K
Tower climber for hire
http://www.aa1k.us/
Cell: 302-632-2353
Reviews of AA1K tower work on eham website:
http://www.eham.net/reviews/detail/12922
Hug your favorite tower every day, and always stay connected to it.
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of john nistico
Sent: Tuesday, April 20, 2021 9:01 PM
To: towertalk <towertalk@contesting.com>
Subject: [TowerTalk] Long span lanyard for wire antenna
So my towers are up and aluminum going on. The 4 towers are spaced 350 ft
apart. Any suggestions on what I can run from tower to tower for wire
antenna supports?
NY6DX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|