Towertalk
[Top] [All Lists]

[TowerTalk] RG-402 wound on FT-240 core

To: Towertalk Reflector <towertalk@contesting.com>
Subject: [TowerTalk] RG-402 wound on FT-240 core
From: Byron Tatum <bjtatum1@att.net>
Date: Thu, 18 Mar 2021 16:19:27 +0000 (UTC)
List-post: <mailto:towertalk@contesting.com>
Just a note --    The actual semi-rigid cable (silver plated copper tubing 
outer conductor 0.141" OD) that is being discussed RG-402 has an equivalent in 
a "conformable" cable. This conformable cable is the same construction except 
instead of solid copper tubing outer conductor it has a solder-soaked braid. 
Easier to work with and same electrical properties. Huber-Suhner produces one 
called "Sucoform" and another called "Sucoflex". I use the RG-401 size (0.250") 
for making short jumpers in my VHF/UHF station, using the same connectors made 
for RG-401 semi-rigid. These connectors are easy to find and not expensive, if 
you dig around a little. This 0.250" cable has very high power handling ratings 
at VHF/UHF.   There is a Chinese supplier of conformable cables on eBay. You 
can get both of these sizes with or without a jacket. The Huber-Suhner cable 
Sucoform has no jacket.Just some limited information from my experience,Byron 
W5FH
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>