Hi all,
I normally use RG400 for chokes on FT240 toroids.
Recently I've tryed RG402 semi-rigid coax cable, the "blue one".
RF properties are quite similar, in fact RG402 seems to be a bit better than
RG400.
Because RG402 is semi-rigid, is much easier to make tight turns on the toroids,
easier to work with.
After some months using it, HF bands legal limit amp, I can't see any issue.
Just wondering if I am missing anything, or if someone else have tried the
RG402 coax.
Thanks
73, Maximo
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|