Towertalk
[Top] [All Lists]

[TowerTalk] Norfolk, Mass Tower experience?

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: [TowerTalk] Norfolk, Mass Tower experience?
From: Bud Kozloff <w1nsk@hotmail.com>
Date: Tue, 9 Mar 2021 02:25:09 +0000
List-post: <mailto:towertalk@contesting.com>
Thinking of 45g, 80ft , 45 g. 10 ft mast on top for 90’ total. How much trouble 
Am I to expect? Cant believe “Amateur Antenna Supports excluded from 
restriction”. Too good to be true! 

Sent from my iPhone

> On Mar 8, 2021, at 6:58 PM, towertalk-request@contesting.com wrote:
> 
> Send TowerTalk mailing list submissions to
>    towertalk@contesting.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>    
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftowertalk&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158976584%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=mntJ2SNPwdOhnLnyiSkK5vHAX2DSVv8JPOga2%2Fgw%2FHI%3D&amp;reserved=0
> or, via email, send a message with subject or body 'help' to
>    towertalk-request@contesting.com
> 
> You can reach the person managing the list at
>    towertalk-owner@contesting.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TowerTalk digest..."
> 
> 
> Today's Topics:
> 
>   1. Harbour Industries RG-400 (Jamie WW3S)
>   2. Re: Harbour Industries RG-400 (Jim Brown)
>   3. Re: Harbour Industries RG-400 (john@kk9a.com)
>   4. Re: Harbour Industries RG-400 (Wayne Kline)
>   5. EZNEC/AutoEZ Shunt Coil Modelling for Yagis (David Needham)
>   6. Re: Harbour Industries RG-400 (weaverwf@usermail.com)
>   7. Looking for tower advice (Kelley)
>   8. Tower help in SE Wis. (Bruce Ford)
>   9. Re: Looking for tower advice (Gary)
>  10. Re: Looking for tower advice (Ron Gorski)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Mon, 08 Mar 2021 18:36:23 +0000
> From: "Jamie WW3S" <ww3s@zoominternet.net>
> To: "towertalk@contesting.com" <towertalk@contesting.com>
> Subject: [TowerTalk] Harbour Industries RG-400
> Message-ID: <em5a42ab87-5c72-4a8b-b79c-800f0db86f30@desktop-eu9mt98>
> Content-Type: text/plain; charset=utf-8; format=flowed
> 
> Anyone have experience with this? Its on Amazon but half the price of 
> other manufacturers.
> 
> ------------------------------
> 
> Message: 2
> Date: Mon, 8 Mar 2021 10:56:53 -0800
> From: Jim Brown <jim@audiosystemsgroup.com>
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Harbour Industries RG-400
> Message-ID:
>    <b3e80e0a-96b5-9fa1-22be-94e52dd75276@audiosystemsgroup.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
> 
>> On 3/8/2021 10:36 AM, Jamie WW3S wrote:
>> Anyone have experience with this? Its on Amazon but half the price of 
>> other manufacturers.
> 
> Harbour Industries is based on the VT/QC border, and has been the 
> source, through an eBay vendor, of the RG400 for the chokes I've wound 
> and measured. My caution is to make sure you're dealing with a reputable 
> vendor.
> 
> 73, Jim K9YC
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Mon, 08 Mar 2021 14:33:20 -0600
> From: john@kk9a.com
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Harbour Industries RG-400
> Message-ID:
>    <20210308143320.Horde.n8LEzS7RIg9HHiTgAFWsUub@www11.qth.com>
> Content-Type: text/plain; charset=utf-8; format=flowed; DelSp=Yes
> 
> I bought a lot of Harbour RG400 on eBay for a very reasonable price. I  
> have no way to test it. It has double shielding and I have had no  
> issues with the jumpers that I made.
> 
> John KK9A
> 
> 
> Jamie WW3S
> 
> Anyone have experience with this? Its on Amazon but half the price of
> other manufacturers.
> 
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Mon, 8 Mar 2021 21:00:59 +0000
> From: Wayne Kline <w3ea@hotmail.com>
> To: "john@kk9a.com" <john@kk9a.com>, "towertalk@contesting.com"
>    <towertalk@contesting.com>
> Subject: Re: [TowerTalk] Harbour Industries RG-400
> Message-ID:
>    
> <MN2PR01MB5918B67D123E8E487ABF58A78F939@MN2PR01MB5918.prod.exchangelabs.com>
>    
> Content-Type: text/plain; charset="us-ascii"
> 
> I also finished my inner station jumpers with Harbour  RG400   using crimp 
> shield and solder  Center conductor   PL250 and BNC
> 
> I have has No problems
> 
> Wayne ,W3EA
> Sent from 
> Mail<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgo.microsoft.com%2Ffwlink%2F%3FLinkId%3D550986&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158976584%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=YHv0bwDrvSPHdzMSo4Wg7Xmf7Y5HRy893RhQkwvhJ9A%3D&amp;reserved=0>
>  for Windows 10
> 
> From: john@kk9a.com<mailto:john@kk9a.com>
> Sent: Monday, March 8, 2021 3:33 PM
> To: towertalk@contesting.com<mailto:towertalk@contesting.com>
> Subject: Re: [TowerTalk] Harbour Industries RG-400
> 
> I bought a lot of Harbour RG400 on eBay for a very reasonable price. I
> have no way to test it. It has double shielding and I have had no
> issues with the jumpers that I made.
> 
> John KK9A
> 
> 
> Jamie WW3S
> 
> Anyone have experience with this? Its on Amazon but half the price of
> other manufacturers.
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftowertalk&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158976584%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=mntJ2SNPwdOhnLnyiSkK5vHAX2DSVv8JPOga2%2Fgw%2FHI%3D&amp;reserved=0
> 
> 
> 
> ------------------------------
> 
> Message: 5
> Date: Mon, 8 Mar 2021 16:00:52 -0500
> From: David Needham <aa4vt.dave@gmail.com>
> To: towertalk@contesting.com
> Subject: [TowerTalk] EZNEC/AutoEZ Shunt Coil Modelling for Yagis
> Message-ID:
>    <CALNJPz2cLQyM5=YUHyBHqRMUMG+YHEU-zZ+DVcTYH1HuZrhexw@mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
> 
> I have heard we have several modelling experts out there. I have purchased
> both EZNEC+ and AutoEZ and adapted a 20-15-10m Triband design for separate
> feedlines. I am matching the impedance with shunt coils across the driven
> elements. I built the coils using a coil calculator then tweaked them to
> the correct value with my Rig Expert analyzer. I didn't get anywhere near
> the expected result of the model with the real antenna.
> 
> I modeled the shunt coils as R+jX loads connected in parallel to the center
> of each driven element, but am guessing that wasn't the right way to go? Is
> anyone able to point me in the right direction? I am trying to get this
> Yagi ready to go for the CQWW WPX contest at the end of this month.
> 
> If you reply to me off list,I will send the AutoEZ/NEC file I built for the
> model.
> -- 
> Thank you!
> David Needham, AA4VT (formerly K4AJA and K8AJA)
> 
> 
> ------------------------------
> 
> Message: 6
> Date: Mon, 8 Mar 2021 16:28:16 -0500
> From: "weaverwf@usermail.com" <weaverwf@usermail.com>
> To: TowerTalk@contesting.com
> Subject: Re: [TowerTalk] Harbour Industries RG-400
> Message-ID: <4174765D-C3A6-4BA3-A687-9A6F54F0E545@usermail.com>
> Content-Type: text/plain; charset=utf-8
> 
> Same here. Crimp shield and solder tip for in-shack jumpers. Tested out fine 
> on impedance and Vf using a Rigexpert AA-55. Routinely run 1200W or so.
> 
> 73,
> Bill WE5P
> 
> Comfortably Numb
> 
>> On Mar 8, 2021, at 16:02, Wayne Kline <w3ea@hotmail.com> wrote:
>> 
>> ?I also finished my inner station jumpers with Harbour  RG400   using crimp 
>> shield and solder  Center conductor   PL250 and BNC
>> 
>> I have has No problems
>> 
>> Wayne ,W3EA
>> Sent from 
>> Mail<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgo.microsoft.com%2Ffwlink%2F%3FLinkId%3D550986&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158986549%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=Y4M0QGrPmyNKoGT02rCDr190EyUK%2BJT1sIAcghb3uT8%3D&amp;reserved=0>
>>  for Windows 10
>> 
>> From: john@kk9a.com<mailto:john@kk9a.com>
>> Sent: Monday, March 8, 2021 3:33 PM
>> To: towertalk@contesting.com<mailto:towertalk@contesting.com>
>> Subject: Re: [TowerTalk] Harbour Industries RG-400
>> 
>> I bought a lot of Harbour RG400 on eBay for a very reasonable price. I
>> have no way to test it. It has double shielding and I have had no
>> issues with the jumpers that I made.
>> 
>> John KK9A
>> 
>> 
>> Jamie WW3S
>> 
>> Anyone have experience with this? Its on Amazon but half the price of
>> other manufacturers.
>> 
>> _______________________________________________
>> 
>> 
>> 
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftowertalk&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158986549%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=vB%2BXVe5YQ0NbN2VlTEBeZozl%2FwQs%2BFa4vhTZpUmTscQ%3D&amp;reserved=0
>> 
>> _______________________________________________
>> 
>> 
>> 
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftowertalk&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158986549%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=vB%2BXVe5YQ0NbN2VlTEBeZozl%2FwQs%2BFa4vhTZpUmTscQ%3D&amp;reserved=0
> 
> 
> 
> ------------------------------
> 
> Message: 7
> Date: Mon, 8 Mar 2021 15:33:33 -0600
> From: Kelley <kelley@analogman.tech>
> To: towertalk@contesting.com
> Subject: [TowerTalk] Looking for tower advice
> Message-ID: <1d800cb7-691b-c51e-a122-e4636aca521c@analogman.tech>
> Content-Type: text/plain; charset=utf-8; format=flowed
> 
> I recently moved to an new QTH. My yard is much smaller than my previous 
> yard (2.5 acres versus about .3 acres). I've currently got an all-band 
> dipole up but I've been thinking about a small tower. I've had towers at 
> previous QTH's, but I'm looking for something smaller and easier to work 
> with.
> 
> The city I live in restricts amateur towers to a maximum of 40 feet 
> (somewhere around 30 feet would be good). Ideally, I'm looking for a 
> setup that lets me work on antennas from the ground. I'm looking at 
> installing a small tri-band beam (perhaps something like a Cushcraft 
> A3S), rotor, a vhf/uhf vertical, and an inverted V wire antenna. It 
> would have to be self-supporting (there's no room for guy wires). 
> Something used is probably more inline with my budget.
> 
> Any thoughts, suggestions, recommendations, dos, don'ts...
> 
> Thanks,
> 
> Kelley w0rk
> 
> 
> 
> ------------------------------
> 
> Message: 8
> Date: Mon, 8 Mar 2021 15:52:35 -0600
> From: Bruce Ford <ks9u@aol.com>
> To: towertalk@contesting.com
> Subject: [TowerTalk] Tower help in SE Wis.
> Message-ID: <25141C03-7B0B-4C5F-A9E1-B724694B9604@aol.com>
> Content-Type: text/plain;    charset=us-ascii
> 
> Older age and some of past  choices in life are now limiting my ability to 
> climb as much as I used to. I need to repair and reattach a feed line to my 
> 2m vertical on my 160 vertical and also find a service to work on my rotating 
> tower. I can still service the 50footer near the house but I think the other 
> would be a problem. I am in the Kenosha,Wi area. Any leads would be 
> appreciated . Bruce K9RO 
> 
> ------------------------------
> 
> Message: 9
> Date: Mon, 8 Mar 2021 22:40:38 +0000
> From: Gary <gary_mayfield@hotmail.com>
> To: "towertalk@contesting.com" <towertalk@contesting.com>
> Subject: Re: [TowerTalk] Looking for tower advice
> Message-ID:
>    
> <CH2PR13MB3864FC8105366AE0D0D478438A939@CH2PR13MB3864.namprd13.prod.outlook.com>
>    
> Content-Type: text/plain; charset="us-ascii"
> 
> Kelley,
> 
>    I have no experience with but, have always been intrigued by Universal 
> Towers aluminum tower. They seem like a practical solution for the small lot 
> little pistol station. The price seem reasonable too.
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.universaltowers.com%2Ftowers&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158986549%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=%2BnYhDGg6QFYoidLRI3LRjpkPmq5R2RvItHfZM%2FSPGSU%3D&amp;reserved=0
> 
> 73,
> Joe kk0sd
> 
> -----Original Message-----
> From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Kelley
> Sent: Monday, March 8, 2021 3:34 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Looking for tower advice
> 
> I recently moved to an new QTH. My yard is much smaller than my previous yard 
> (2.5 acres versus about .3 acres). I've currently got an all-band dipole up 
> but I've been thinking about a small tower. I've had towers at previous 
> QTH's, but I'm looking for something smaller and easier to work with.
> 
> The city I live in restricts amateur towers to a maximum of 40 feet 
> (somewhere around 30 feet would be good). Ideally, I'm looking for a setup 
> that lets me work on antennas from the ground. I'm looking at installing a 
> small tri-band beam (perhaps something like a Cushcraft A3S), rotor, a 
> vhf/uhf vertical, and an inverted V wire antenna. It would have to be 
> self-supporting (there's no room for guy wires). 
> Something used is probably more inline with my budget.
> 
> Any thoughts, suggestions, recommendations, dos, don'ts...
> 
> Thanks,
> 
> Kelley w0rk
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftowertalk&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158986549%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=vB%2BXVe5YQ0NbN2VlTEBeZozl%2FwQs%2BFa4vhTZpUmTscQ%3D&amp;reserved=0
> 
> 
> ------------------------------
> 
> Message: 10
> Date: Mon, 8 Mar 2021 23:58:05 -0000
> From: "Ron Gorski" <ron-n9au@sbcglobal.net>
> To: "'Gary'" <gary_mayfield@hotmail.com>,    <towertalk@contesting.com>
> Subject: Re: [TowerTalk] Looking for tower advice
> Message-ID: <004e01d71476$e24ef200$a6ecd600$@sbcglobal.net>
> Content-Type: text/plain;    charset="us-ascii"
> 
> Be advised that I had a 72ft Heights aluminum tower that was self supporting
> till it snapped 4ft from ground level. That was decades ago. The moral to my
> story is NO MORE ALUMINUM TOWERS.
> Ron N9AU
> 
> -----Original Message-----
> From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Gary
> Sent: Monday, March 08, 2021 10:41 PM
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Looking for tower advice
> 
> Kelley,
> 
>    I have no experience with but, have always been intrigued by
> Universal Towers aluminum tower. They seem like a practical solution for the
> small lot little pistol station. The price seem reasonable too.
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.universaltowers.com%2Ftowers&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158986549%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=%2BnYhDGg6QFYoidLRI3LRjpkPmq5R2RvItHfZM%2FSPGSU%3D&amp;reserved=0
> 
> 73,
> Joe kk0sd
> 
> -----Original Message-----
> From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Kelley
> Sent: Monday, March 8, 2021 3:34 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Looking for tower advice
> 
> I recently moved to an new QTH. My yard is much smaller than my previous
> yard (2.5 acres versus about .3 acres). I've currently got an all-band
> dipole up but I've been thinking about a small tower. I've had towers at
> previous QTH's, but I'm looking for something smaller and easier to work
> with.
> 
> The city I live in restricts amateur towers to a maximum of 40 feet
> (somewhere around 30 feet would be good). Ideally, I'm looking for a setup
> that lets me work on antennas from the ground. I'm looking at installing a
> small tri-band beam (perhaps something like a Cushcraft A3S), rotor, a
> vhf/uhf vertical, and an inverted V wire antenna. It would have to be
> self-supporting (there's no room for guy wires). 
> Something used is probably more inline with my budget.
> 
> Any thoughts, suggestions, recommendations, dos, don'ts...
> 
> Thanks,
> 
> Kelley w0rk
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftowertalk&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158986549%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=vB%2BXVe5YQ0NbN2VlTEBeZozl%2FwQs%2BFa4vhTZpUmTscQ%3D&amp;reserved=0
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftowertalk&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158986549%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=vB%2BXVe5YQ0NbN2VlTEBeZozl%2FwQs%2BFa4vhTZpUmTscQ%3D&amp;reserved=0
> 
> 
> -- 
> This email has been checked for viruses by AVG.
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avg.com%2F&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158986549%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=FsTpiXTtV7ZQKKGzgLGhcSWZ2S7I46JHvndULwkgbio%3D&amp;reserved=0
> 
> 
> 
> ------------------------------
> 
> Subject: Digest Footer
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftowertalk&amp;data=04%7C01%7C%7Cb917d293cb134fac456b08d8e28e150a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637508447158986549%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=vB%2BXVe5YQ0NbN2VlTEBeZozl%2FwQs%2BFa4vhTZpUmTscQ%3D&amp;reserved=0
> 
> 
> ------------------------------
> 
> End of TowerTalk Digest, Vol 219, Issue 10
> ******************************************
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Norfolk, Mass Tower experience?, Bud Kozloff <=