Towertalk
[Top] [All Lists]

Re: [TowerTalk] TIC rollers

To: towertalk@contesting.com
Subject: Re: [TowerTalk] TIC rollers
From: john@kk9a.com
Date: Tue, 16 Jun 2020 11:46:55 -0500
List-post: <mailto:towertalk@contesting.com>
I do not believe that there is much vintage TIC support but it has been quite a while since I called Carl.

If I needed rollers I would just purchase gray PVC rod from McMaster-Carr. They have same day shipping and are almost never out of stock. You just have to cut the rod and drill a hole in the center. If you have access to a lathe it is super easy and probably more precise than the original rollers.

John KK9A



Tim Duffy k3lr wrote:

Hello Ty

Call or email Carl at TIC.

73
Tim K3LR

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Tyler Stewart via TowerTalk
Sent: Tuesday, June 16, 2020 7:20 AM
To: towertalk at contesting.com
Subject: [TowerTalk] TIC rollers

The plastic rollers on one of my old 1022 rings have worn down. Anyone have a source for replacements?
73, Ty K3MM

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>