Towertalk
[Top] [All Lists]

Re: [TowerTalk] Anyone have experience using Davis bury-flex as their ro

To: Pete Raymond <n4kwpete@centurylink.net>
Subject: Re: [TowerTalk] Anyone have experience using Davis bury-flex as their rotor loop
From: Dick Green WC1M <wc1m73@gmail.com>
Date: Mon, 18 May 2020 22:34:38 -0400
List-post: <mailto:towertalk@contesting.com>
Davis Bury Flex is not the same as Times Microwave LMR-400 or LMR-400UF. The 
performance specs at HF are similar, but Davison BuryFlex is more flexible. 
I’ve used it for rotor loops and rotating crank up tower feedline for many 
years with no problems.

73, Dick WC1M

Sent from my iPhone

> On May 18, 2020, at 6:40 PM, Pete Raymond <n4kwpete@centurylink.net> wrote:
> 
> I  plan to run LMR 400 up to the top of the tower, and the lowest loss coax 
> for the remaining antennas on the mast. It's advertised as being flexible and 
> capable of being used as a rotor loop.  Have you used it this way?
> 73, Pete, N4KW
> 
> 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>