On Tue, Mar 17, 2020, at 17:20, Don wrote:
> I have a WT-51 I brought down from my last home sitting on some saw
> horses that has not yet gone up yet (currently just using my HG-70HD). I
> had a plate made back when with heavy OD rod having hooks welded to the
> outer plate rims that allows mounting the plate anyplace within the
> tower below the existing factory plate mount tabs.I can't find the
> drawing but can take a picture of it so you can see it. Bit rusty from
> the salt air here but easy to make. I dropped the rotator down from the
> top and then inserted a long aluminum mast I had. I Even left the old
> rotator plate in place, slid the mast through it. Thought about mounting
> another bearing there. New plates slided in easily from the tower bottom.
>
> Don W7WLL
Don,
Thanks for the offer of a photo, please do. I'm very curious about what you've
done.
--
Art Greenberg
WA2LLN
art@artg.tv
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|