I had a Tristao tower here for many years. It was six, 10-foot sections and
used formed stops to support the sections. I never had the whole thing up, but
I did use the bottom three sections, unguyed, to support a two-meter EME array
for some time at a former QTH. I figured I would never get it permitted here,
so it laid in the yard for years until I gave it to a neighbor.
Wes N 7WS
On 2/13/2020 11:36 AM, Skip via TowerTalk wrote:
The tower you described sounds like an old Tri-Ex or Tristao. You cranked up
and set stops under each section, lowered sections onto the stops and then set
the guy cables. Some of these tower would raise the top section first, set the
stops in place and then crank up each additional sections then guy.
Skip, KJ6Y.
Communications Service Co
Sent from my IPhone
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|