Whoops misread the note: two driven elements stacked at 35 and 70 ft.
I use two tower legs to support a 40 m Driven element. One leg holds the
element (insulated boom to mast plate) and another tower leg uses a short piece
of PVC clamped around the element (about a foot or so from the center) and
clamped to the leg. Very solid.
Regards,
Mark, K1RX
603-231-8965
> On Feb 10, 2020, at 8:05 PM, Randy Lake <randyn1kwf@gmail.com> wrote:
>
> Looking for mounting suggestions for sidemounting (2) full size 20m
> aluminum elements, both driven. I am currently using pvc pipe and rope
> supports but would like something more robust. One element will be at 35ft
> and the other at 70ft. These will need to be insulated from the tower as
> both elements are driven.
> Any suggestions ?
>
> --
> Randy Lake N1KWF
> 73 Gunn Rd.
> Keene,NH
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Groups.io Links: You receive all messages sent to this group.
>
> View/Reply Online (#57651): https://groups.io/g/yccc/message/57651
> Mute This Topic: https://groups.io/mt/71154947/444116
> -=-=-
> YCCC Discussion Group (members-only)
> -=-=-
> Group Owner: yccc+owner@groups.io
> Unsubscribe: https://groups.io/g/yccc/unsub [mpridesti@yahoo.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|