I use crimping for a few months. It revolutionized my attitude to cables.
When I need a cable of random length, I just cut the desired cable length
from a spool and make connectors on site. For lmr240 type, I cut it using a
rg6 tool and crimp - it takes about 20 seconds. The crimp tool is from HRO
but Amazon specials are identical. I buy silver Teflon connectors on eBay.
Zero failure rate so far at KW level.
Ignacy, no9e
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|