Herb-
I have done alot of experimenting with the old F12 C3 line.
What you are proposing is certainly feasible. If I were going to do it
I would definitely model it in EZNec first before I touched a single
nut or bolt. You can spend a hideous amount of time tuning if
you just start out by changing element lengths.
Tom
K0SN
On Thu, Nov 28, 2019 at 10:58 AM Herbert Schoenbohm <
herbert.schoenbohm@gmail.com> wrote:
> I have a C3S tribander which I seldom use except when on WARC bands. It is
> useable there but not as good as I think it would be modifying it for 24
> and 18Mhz. I wonder if anyone has tried that? I don't care about 10 and
> 15. I think by just changing the dimension, i.e making the 10-meter
> elements longer for 24Mhz and the 15-meter element shorter to cover 18
> Mhz, would possibly work. Is there anyone who has done this successfully?
>
> Herb, KV4FZ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|