Hi Glenn,
I only have two traps, one of which I haven't taken apart. I'm thinking it's
probably made the same way- would make sense. No, no other photos. My guess is
that the other trap, being the one at the top of the antenna, will have
different length coils in it. As I type this, I don't know if it is the same
outer physical length as the one I photographed.This is just something I pulled
out of the 'aluminum parts rack' to use a trap for show and tell in a class.
Many thanks to all who have taught me about this design!
Tom
On Friday, November 22, 2019, 01:37:13 PM MST, Glenn Pritchard
<gpritchard7000@gmail.com> wrote:
Hi Tom
That looks like a Mosley trap from one of their RV series of verticals.
Any other photos and how many traps?
Glenn, VA7UO
Sent from my iPhone
> On Nov 22, 2019, at 11:01 AM, Tom WA9WSJ via TowerTalk
> <towertalk@contesting.com> wrote:
>
> Hello Oh Wise Ones,
> I have a trap from a vertical antenna, I took it apart to use as a show and
> tell item but never expected that it has two different coils inside in series
> with the outer aluminum tube/capacitor.
> I have a picture of it on my site. http://www.wa9wsj.com/misc%20stuff.htm
> About mid page.
> Can anyone tell me about it?
> Thanks!
> Tom
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|