Yo,
Dave, K4TO, is searching for a way to lift a rather heavy rotor. LOTS of
suggestions. Here's mine:
Dave, look at Northern Tool. I think this link will get you close:
[
https://www.northerntool.com/shop/tools/category_material-handling+hoists-lifts-cranes+rope-pulley-hoists
|
https://www.northerntool.com/shop/tools/category_material-handling+hoists-lifts-cranes+rope-pulley-hoists
]
Inexpensive and they work. Well under $15. I replaced the poly rope with a
nylon braid. Easier to handle. Doesn't twist up and look like a snake.
I believe its a 4:1 or 5:1 lift ratio, so good force multiplier. I don't know
if I'd trust it for overhead lifting of real heavy things, but it would
probably work for what you need.
That is all.
73 K9WN Jake
OUT
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|