I bought a hand held (about the size/weight of a good skill saw) winch.
It runs on 120VAC and has 1000 lb pulling capacity. Comes with hooks on
both ends, one to hold the winch and one on the end of the 25 ft cable.
It has a trigger switch like a skill saw and will power in and power
out. If you overload it the breaker pops up and you have to wait a tad
for it to cool off then push the breaker button and go again. I got
mine at Northern Tool but they are available lots of places.
Amazon.com: WARN 885000 Corded PullzAll 120V AC ...
https://www.amazon.com › ...
<https://www.amazon.com/WARN-885000-Corded-PullzAll-120V/dp/B0043OV0IA>
<https://www.google.com/search?q=hand+held+electric+winch&rlz=1C1AWFC_enUS789US789&oq=hand+held+electric+winch&aqs=chrome..69i57j0.5759j0j8&sourceid=chrome&ie=UTF-8#>
1.
2.
Rating: 4.2 - 559 reviews
Buy WARN 885000 Corded PullzAll 120V AC:/Winches/- Amazon.com ... Warn
885001 PullzAll/Hand Held Electric/Pulling Tool Corded 120V CSA 1000 lb.
Warn 110-Volt AC PullzAll Hand-Held Electric Portable Pulling ...
https://www.homedepot.com › Warn-110-Volt-AC-PullzAll-Hand-Held-El...
<https://www.homedepot.com/p/Warn-110-Volt-AC-PullzAll-Hand-Held-Electric-Portable-Pulling-and-Lifting-Tool-885000/204342687>
<https://www.google.com/search?q=hand+held+electric+winch&rlz=1C1AWFC_enUS789US789&oq=hand+held+electric+winch&aqs=chrome..69i57j0.5759j0j8&sourceid=chrome&ie=UTF-8#>
1.
Rating: 4.6 - 40 reviews
Visit The Home Depot to buy Warn 110-Volt AC Pullzall/Handheld
Electric/... of a/winch/, come-a-long or/hoist/with the compact style of
a/handheld/power tool.
WARN PullzAll 120 Volt Handheld Electric Pulling Tool Winch ...
https://www.northerntool.com › Winches › AC Powered Winches
<https://www.northerntool.com/shop/tools/product_200455486_200455486>
Rating: 4.6 - 191 reviews - $196.99 - In stock
The Warn PullzAll is an/electric/pulling tool that replaces come-a-longs
and chain falls. Now you can get the job done faster, with more control
and without the ...
On 11/14/2019 8:30 AM, Jim Thomson wrote:
Date: Wed, 13 Nov 2019 12:26:10 -0500
From: Dave Sublette <k4to.dave@gmail.com>
To: kj6y--- via TowerTalk <towertalk@contesting.com>
Subject: [TowerTalk] multi-sheave pulley
<The trouble is, at age 77 I no longer have the arm strength that I once
<had. So, I would like to use a multi-sheave system to reduce the force
<necessary to lift it off and reinstall it. I have a two pully system which
<would reduce it to half, but I think I had better go with a three or four
<section system.
<All this to ask what is a good three or four sheave fully? It only need be
<a two inch diameter. Or, a one inch would work also. If you have any
<knowledge which one and where to get it, it would be appreciated. In the
<meantime, I will do my own searching. But, I thought it would be good to
<have the input of someone who has actually used what they recommend.
<As always, I look forward to the excellent advice that comes from this
<group.
<73,
<Dave, K4TO
### Use a ....cumalong. Easy, and much better control vs a lawn tractor.
http://ds-studio.co/cumalong-tool/ The 1st pix, is the version I have.
It has
the 2nd hook option..... so you double up on the cable....so its
only half
as long, but capacity increases from 1 ton to 2 tons. You then also
get
an even finer adjustment for a given amount of lever pull. An 88 lb
rotor
would be a piece of cake.
## I use a multi sheave / rope setup to get a yagi to top of tower,
then the same
cumalong to do the last few inches. Grnd crew lifts yagi up to top
of tower, then I
hook the cumalong to a 2nd quick rls shackle. Grnd crew then goes
home. I lift yagi
the last little bit.... then....using my hb version of the infamous
F12..easy on mounting
scheme, mate the horz boom plate to the already installed vert mast
plate.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|