Towertalk
[Top] [All Lists]

[TowerTalk] Force 12 Antenna

To: <towertalk@contesting.com>
Subject: [TowerTalk] Force 12 Antenna
From: "Jim Thomson" <jim.thom@telus.net>
Date: Sun, 18 Aug 2019 09:33:37 -0700
List-post: <mailto:towertalk@contesting.com>
Date: Fri, 16 Aug 2019 17:44:28 -0600
From: Glenn Haffly <k5zeglenn@gmail.com>
To: TowerTalk@contesting.com
Subject: [TowerTalk] Force 12 Antenna

>Anyone have a manual for a Force 12 Delta 4 XL? It's a 9 element beam for
>40 through 10? Looking for the weight , wind load , turning radius and
>projected surface area. Could not find any info online.

>Thanks Glenn

##  watch  out!   Those F12  windload specs  are  incorrect.   They  used the  
old  222- C  spec....
which  is the  actual  projected  area of a cylinder....  multiplied by  .67 

##  IE:  when F12  sez an  ant  is ....  10 sq feet.... its  really  15  sq  
ft.      You  have  to  multiply  F12  spec  by 1.5   to  get  reality.  

## towers  are  all  rated  using .....projected area of a cylinder. 

##  This  is how  towers get  overloaded. 

## JK ants...and  optibeam   have  done  their windload specs  the  correct  
way.   

##  These  days,  the projected  area  of  ALL  the  eles of a HF  yagi  are  
simply  added  up, to  obtain .... total projected  area. 

##  Typ the  total  eles  area  is  greater  than  the  boom  area....  so  the 
total  eles  area is  used  for  the  spec. 

Jim   VE7RF  

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>