Yes, from what I understand now, you are correct. According to some info in
found in some archives, Rohn redesigned the AX, creating the BX (B-model using
X bracing, I guess). Not only did they add an X-brace to each section, but they
made the steel gauge heavier for at least the tower legs. From what I read, I
couldn’t tell if they made the X-braces themselves heavier, or if they beefed
up the aluminum rivets. I also don’t know if (or how much) Rohn modified the
published data on their beefed-up BX series. If they left it unchanged from the
original AX, it would leave them a much larger safety margin.
Kim N5OP
"People that make music together cannot be enemies, at least as long as the
music lasts." -- Paul Hindemith
> On Jul 5, 2019, at 11:37 AM, Mark - N5OT <r-emails@n5ot.com> wrote:
>
> I am enjoying Kim's thread on BX towers. Steve mentioned that the other guy
> had an AX not a BX and I need some clarification from guys who know more than
> I do. If the fellow who's antenna twisted itself to pieces had and AX I
> would have thought the more notable deal with the X-bracing would be that on
> the AX the braces don't take up as much vertical space, and don't touch each
> other. On the BX they do. Clearly the BX is a better design? (Hell to
> climb though, just sayin'):
>
> Examples of what I am talking about:
>
> https://www.n5ot.com/AX.jpg
> https://www.n5ot.com/BX.jpg
>
> If I have this wrong I would appreciate knowing it.
>
> Thanks,
> 73 - Mark N5OT
>
>
>> On 7/2/2019 3:22 PM, Kim Elmore wrote:
>> Ah! OK — I began to wonder if I was losing my marbles. Well... I obviously
>> lost ‘em long ago, but still...
>>
>> Kim N5OP
>>
>> "People that make music together cannot be enemies, at least as long as the
>> music lasts." -- Paul Hindemith
>>
>>>> On Jul 2, 2019, at 11:49 AM, k7lxc@aol.com wrote:
>>>>
>>>> I recently asked a question about HDBX 48 torque loading. Another
>>> towertalkian told me his failed in about 80 MPH winds. He sent me a
>>> picture of his failed HDBX 48 (more heavily loaded than mine by a fair
>>> bit) that failed. Something I noticed in the picture was that his
>>> HDBX48?? had only *five* X-braces per section; I thought it looked odd,
>>> so I went out and looked at mine: mine has *six* X-braces per section.
>>> He said his was manufactured sometime around 1968-1970 while mine was
>>> put up around 1986, so was probably made around that time.
>>>
>>>> Did Rohn change the design of their BX towers to add another X-brace to
>>> each section, or am I seeing things?
>>>
>>> Nope, your eyesight is ok. The original tower you saw was the AX.
>>>
>>> Cheers,
>>> Steve K7LXC
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|
