I do not really understand this question.
If it is a tower anchor concern, I have no engineering background
however I would move the lower anchors further from the tower to
maintain approximately the same angle on all guys.
If the question is about having an unlevel vertical radial field it
probably will not effect the vertical's pattern much and there is not
much you can do except move the verticals to a level property.
John KK9A
Chris Hoelzle w7mi wrote:
I am installing both a 55G and a 45G. In both cases, ONE of the radials is
15 feet lower than the other two.
I need advice on how to deal with this
--
W7MI
Chris Hoelzle
Bandon, OR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|