Towertalk
[Top] [All Lists]

Re: [TowerTalk] Ham 4 wrong indication

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Ham 4 wrong indication
From: Robert Harmon <k6uj@pacbell.net>
Date: Tue, 12 Mar 2019 09:03:00 -0700
List-post: <mailto:towertalk@contesting.com>
Bob,

I have been following the responses and I thought the same thing as the others 
that a wire connection swap would solve it.  Since you tried another control 
box and also a wire connection swap to the box, and your spare rotator works 
properly,  I guess the only thing left is the rotator itself.  I don’t 
understand what could be happening in the rotator that could be causing the 
reverse rotation thing though.  There are a couple of rotator repair sites on 
line Norm’s Rotators is one that does a lot of the Ham 4’s and Tailtwister 
repairs and refurbs.  I would email him and see what he thinks.  Of course the 
first thing he is going to say is the wires are reversed,  hihi.  

73,
Bob
K6UJ

> On Mar 12, 2019, at 4:36 AM, robert <wa1fcn@charter.net> wrote:
> 
> 
> GM All
> 
>     First thanks to all who offered ideas.  Yes the most logical thought
> 
>     would be I did not match wires from control box to rotor.  I double
> 
>     checked and they were correct . Next I changed to another
> 
>     spare control box.  Same results. I tried a couple wire connection
> 
>     swaps as suggested.  I got proper indication that way but no rotation.
> 
>         I have removed rotor and installed another spare and will continue
> 
>         to use that.   Thanks once again to all.
> 
>             BoB WA1FCN
> 
> On 3/11/2019 7:38 AM, Michael Clarson wrote:
>> Do you have the right meter scale? There were two. One for when stop is 
>> North, and another with stop south. -- Mike
>> 
>> On Sun, Mar 10, 2019, 8:09 PM robert <wa1fcn@charter.net 
>> <mailto:wa1fcn@charter.net>> wrote:
>> 
>> 
>>    GE all
>> 
>>             Well I am not sure what is happening. This is my third
>>    attempt
>> 
>>         to send this message.
>> 
>>             I purchased a Ham 4 rotor from a sk estate (N4KG) very cheap.
>> 
>>             I was surprised to find it worked. Unfortunately When I
>>    turn to
>> 
>>             west it goes East.  South goes North. The antenna does
>>    rotate.
>> 
>>             I have gotten used to using reverse buttons, but was
>>    wondering
>> 
>>             if there is a simple fix ?
>> 
>>                 BoB WA1FCN
>> 
>>    _______________________________________________
>> 
>> 
>> 
>>    _______________________________________________
>>    TowerTalk mailing list
>>    TowerTalk@contesting.com <mailto:TowerTalk@contesting.com>
>>    http://lists.contesting.com/mailman/listinfo/towertalk
>> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>