I think you would have to be creative. The book says the guys need to come
down 96 feet from the base. From just looking at it you would need 144 feet
for the guy wires in one direction. An acre is 209 feet on a side. Looks
like it would take some real creativity to get it in 1/4 acre. I have a 120
foot of Rohn 25 and if you go by the Rohn specifications you probably need
more than a 1/2 acre.
Bill W5VX
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Jim Dawson
Sent: Saturday, February 9, 2019 6:54 AM
To: towertalk <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] 45G leg bolt help
How do you even guy a 120' tower on a 1/4 acre lot? The guys must go stright
up.
Jim - K9DD
----- Original Message -----
From: "Gary K9GS" <garyk9gs@wi.rr.com>
To: "Richard Solomon" <dickw1ksz@gmail.com>; "towertalk"
<TowerTalk@contesting.com>
Sent: Friday, February 08, 2019 3:49 PM
Subject: Re: [TowerTalk] 45G leg bolt help
> So what was the cause of the failure? I'm assuming water backed up and
> froze in the legs, splitting them? It wasn't due to the stove bolts
> failing, was it?
>
>
>
>
>
>
> 73,
> Gary K9GS
> -------- Original message --------From: Richard Solomon
> <dickw1ksz@gmail.com> Date: 2/8/19 3:04 PM (GMT-06:00) To: towertalk
> <TowerTalk@contesting.com> Subject: Re: [TowerTalk] 45G leg bolt help
> We had a local back in the Boston
> area who put up 120' of Rohn 25.
>
> He didn't know about Rohn putting
> the bolts in the tower legs so he went
> out and bought stove bolts.
>
> The tower didn't make it through the
> winter.
>
> 120' of Rohn 25 falling in a 1/4 acre lot
> is not a pretty sight !!
>
> 73, Dick, W1KSZ
>
> On Fri, Feb 8, 2019 at 12:54 PM Mac <libbysales@austin.rr.com> wrote:
>
>> Emm has a tower ever come apart because the leg bolts [all 6 ] broke
>> apart, just wondering ? mac/mc w5mc
>>
>> On 2/8/2019 11:44 AM, Byron Tatum wrote:
>> > Hello-Â Â I preparation for installing 2 of 45G towers 130' each, a
>> > while
>> back I bought the required quantity of leg bolt kits #45JBK from a Rohn
>> dealer sold as a Rohn product. These were supplied with bolts/nuts inside
>> plastic tubers with a cap at one end. I did not realize the nuts were
>> staked (3 stake indentations per nut). In fact, they are so heavily
>> staked
>> that they are destroying the threads of the bolts plus really heating up
>> the bolts. I feel like the torque to thread nuts on is excessive and am
>> waiting for a bolt to twist off. Needless to say I will reject all of
>> these.  I have searched until I am blue in the face for a supplier of
>> grade 5 hot dipped galvanized bolts. Can anyone tell me where I can buy
>> these two sizes of grade 5 hot dipped galvanized bolts 5/16" x 2-3/8"
>> long
>> and 7/16" x 2-1/2" long with nuts? I really do not want to buy any more
>> 45JBK not knowing whether they are staked or not, plus the 5/16" nuts in
>> my
>> kits were NOT hot dipped.Byron W5FH
>> > _______________________________________________
>> >
>> >
>> >
>> > _______________________________________________
>> > TowerTalk mailing list
>> > TowerTalk@contesting.com
>> > http://lists.contesting.com/mailman/listinfo/towertalk
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|