Towertalk
[Top] [All Lists]

Re: [TowerTalk] identifying Mosley antenna

To: wa4jqs@mikrotec.com, towertalk@contesting.com, terry burge <ki7m@comcast.net>
Subject: Re: [TowerTalk] identifying Mosley antenna
From: terry burge <ki7m@comcast.net>
Reply-to: terry burge <ki7m@comcast.net>
Date: Fri, 8 Feb 2019 14:35:10 -0800 (PST)
List-post: <mailto:towertalk@contesting.com>
Tony,

If you are looking for spreaders for another quad or similar antenna then 
checkout Max Gain Systems. They make the best spreaders for quads I have ever 
found. I thought the Lightning Bolt spreaders were good but the ones I got from 
MGS were really strong and outstanding two piece. I've got enough to build 
another large quad array 4/5/6/7 elements 10-20 meters. They also have them for 
40 meter quads. Only thing is be prepared to spend for the shipping. Think I 
paid about as much for the shipping as I did for the spreaders. But a quad can 
be build that should last for many years. The next one I plan to build will be 
perhaps a 36' boom job and I intend to make sure everything is double safe to 
last. One of the things especially about a large multi-element array is lots of 
things to break, spin on the mast, get ice buildup, etc. We don't get much of 
the ice out here but it can happen. Wind is the biggest problem on the west 
coast I think.

Terry
KI7M
> On February 8, 2019 at 10:22 AM wa4jqs@mikrotec.com wrote:
> 
> 
> Well lost my 4 ele quad this week which i build in 1973 . thinking about a
> yagi ugh... hi hi.. been looking at the Skyhawk any thoughts
> 
> 73 Tony WA4JQS
> 
> 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>