Half wave in height in of itself is meaningless unless the topography around
the antenna. N6BV has a program which to me is the go to for questions like
this. My station sits on the side of a 14000 ft mountain with a 1:6 drop in
elevation to the north and a 1:6 rise to the south.
I have a three high stack of tribamders at 94,56 and 26. The tribander at 26
ft is far below 1/2 wavelength, in fact less than 1/4 wavelength. However,
when modeled this antenna "looks" like one at 1 wavelength in height. However,
going south, even the top antenna at 94 feet is not really all that good going
uphill when modeled.
Be careful of generalizations about antennas.
Bill KH7XS
-----Original Message-----
From: towertalk-request <towertalk-request@contesting.com>
To: towertalk <towertalk@contesting.com>
Sent: Thu, Jan 17, 2019 11:30 pm
Subject: TowerTalk Digest, Vol 193, Issue 16
Send TowerTalk mailing list submissions to
towertalk@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/towertalk
or, via email, send a message with subject or body 'help' to
towertalk-request@contesting.com
You can reach the person managing the list at
towertalk-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of TowerTalk digest..."
Today's Topics:
1. Half Wave? (Warren Wolff)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|