Not quite clear, but if you’re asking if there is a problem doing separate /
individual bands on each transmitter using a tribander or even a quadband
antenna with a single feedline... no problem at all. We even used to go a step
further and go 1E using two operators on locked out transmitters working two
bands interleaving CQ’s until the ARRL stopped the progress of advancement on
that. Just get decent BPF’s and a triplexor / quadplexor rated for your
intended power or above.
Now if you want to do the above but have two guys in the same band you’ll
generally need extra precautions like antenna separation / orientation, but I
don’t believe you’re trying to do that?
73,
Tim / N6WIN
Sent from Yahoo Mail for iPhone
On Wednesday, October 31, 2018, 07:53, James C. Hall, MD via TowerTalk
<towertalk@contesting.com> wrote:
Not really tower oriented, so reply off list .
Wondering if anyone or group has made use of a triplexer with BPF's during
FD ? We have access to a triband Spiderbeam and the setup would be as the
WRTC stations. We have traditionally run 3A with HF stations separated by
mode. I'm curious as to how it might go if we separated stations (still 3A)
as 10/15M, 20M, and 40/80M.
Any information appreciated.
73, Jamie
WB4YDL
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|