Towertalk
[Top] [All Lists]

Re: [TowerTalk] Ham IV control box

To: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
Subject: Re: [TowerTalk] Ham IV control box
From: Chuck Dietz <w5prchuck@gmail.com>
Date: Fri, 19 Oct 2018 12:40:23 -0500
List-post: <mailto:towertalk@contesting.com>
I assume you mean the meter reading (direction) changes when the brake
lever is depressed. Does it do this when it is not connected to the control
line? Sounds like a short between the brake line and one of the 3
potentiometer wires. Much more likely in the control line rather than in
the control box.

Chuck W5PR

On Fri, Oct 19, 2018 at 12:30 PM Herbert Schoenbohm <
herbert.schoenbohm@gmail.com> wrote:

> I just replaced a defective control box with one I got from eBay and
> everything works except that the meter on comes on when I depress the brake
> switch.  Is there a simple modification that will avoid this?
>
>
> Herb Schoenbohm, KV4FZ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>