Alfredo, I hope that your rebuilding is going well after the terrible
hurricane damage last year. I have been using the saddle clamps that Keith
mentioned for decades, long before DX Engineering sold them, and they are
excellent. Some antennas such as Force 12 use muffler clamps. These have
wider hole spacing and the DXE U-Bolts will not fit those plates without
modification. You can buy stainless steel muffler clamps that will be a
direct replacement from Summit Racing and possibly a local auto store.
GL,
John KK9A
To: "Tower Talk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] U-Bolt and Saddle supplier?
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Sat, 28 Jul 2018 18:02:56 -0500
Google is my first choice to locate antenna and tower hardware from scratch.
Never know what you may find.
I like the service and quality of products offered by DX Engineering:
https://www.dxengineering.com/search/part-type/saddle-clamps
73, Keith NM5G
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Alfredo
Velez WP3C via TowerTalk
Sent: Saturday, July 28, 2018 5:03 PM
To: towertalk@contesting.com
Subject: [TowerTalk] U-Bolt and Saddle supplier?
Hi everyone
Any link of u-bolt and saddle supplier?
73'
Alfredo Velez WP3C/NP4DX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|