Towertalk
[Top] [All Lists]

Re: [TowerTalk] N connector, Re: UHF (PL259) soldered center

To: GaryK9GS <garyk9gs@wi.rr.com>, Clay Autery <KY5G@montac.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] N connector, Re: UHF (PL259) soldered center
From: Grant Saviers <grants2@pacbell.net>
Date: Sat, 7 Jul 2018 08:24:46 -0700
List-post: <mailto:towertalk@contesting.com>
Some of us have "been there, been bitten" by the terrible water migration in the first gen Belden 9913 with air dielectric. Trilogy claims "no water migration" with their air dielectric outdoor version and offer a 15 year warranty so perhaps...

Trilogy 7/8" specs seem very close to AVA5-50 except for bending moment. Almost 2:1 Aircell vs AVA5. Not surprising with the solid Al shield. So it will be less installer friendly, especially in conduit. Flat plate crush favors Aircell by 1.75x so that is nice for those going the direct burial route.

Is any pricing data available?

Grant KZ1W


On 7/6/2018 19:23 PM, GaryK9GS wrote:
Hello Clay,
I think Aircell brand coaxial cable is manufactured in Germany.   It looks like 
Trilogy is one of their US distributors.


73,
Gary K9GS
-------- Original message --------From: Clay Autery <KY5G@montac.com> Date: 
7/6/18  6:44 PM  (GMT-06:00) To: towertalk@contesting.com Subject: Re: [TowerTalk] N 
connector, Re: UHF (PL259) soldered center
Anyone use this cable manufacturer?  Made in Mississippi....  I'm
considering using them for my main tower runs....  maybe split a reel
with someone.

www.trilogycoax.com

73,

______________________
Clay Autery, KY5G
(318) 518-1389


snip..
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>